Front end disassembly

Started the front end disassembly. There's a lot of stuff in the front end so the time to actually take it all off is about double in order to take pictures, tag with tape, and then make sure everything is set out properly.

I take pictures of anything that is remotely complicated like the underside of the headlight assemblies. This has to go back just like you see it here.


Underside of headlamp

I also try to put all the bolt and nuts back on where they came from so I don't have gaggles of plastic bags with tags flying around. Here you can see 2 bolts that hold the bottom of the front bumper assembly to the vaccuum tank horn.


Behind front bumper, vaccuum tank after bumper removal